File Manager

Editing File: /usr/local/cpanel/3rdparty/php/83/lib/php/Services/Weather/Metar.php

<?php
/* vim: set expandtab tabstop=4 shiftwidth=4 softtabstop=4 foldmethod=marker: */

/**
 * PEAR::Services_Weather_Metar
 *
 * PHP versions 4 and 5
 *
 * <LICENSE>
 * Copyright (c) 2005-2011, Alexander Wirtz
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * o Redistributions of source code must retain the above copyright notice,
 *   this list of conditions and the following disclaimer.
 * o Redistributions in binary form must reproduce the above copyright notice,
 *   this list of conditions and the following disclaimer in the documentation
 *   and/or other materials provided with the distribution.
 * o Neither the name of the software nor the names of its contributors
 *   may be used to endorse or promote products derived from this software
 *   without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 * </LICENSE>
 *
 * @category    Web Services
 * @package     Services_Weather
 * @author      Alexander Wirtz <alex@pc4p.net>
 * @copyright   2005-2011 Alexander Wirtz
 * @license     http://www.opensource.org/licenses/bsd-license.php  BSD License
 * @version     CVS: $Id$
 * @link        http://pear.php.net/package/Services_Weather
 * @link        http://weather.noaa.gov/weather/metar.shtml
 * @link        http://weather.noaa.gov/weather/taf.shtml
 * @example     examples/metar-basic.php            metar-basic.php
 * @example     examples/metar-extensive.php        metar-extensive.php
 * @filesource
 */

require_once "Services/Weather/Common.php";

require_once "DB.php";

// {{{ class Services_Weather_Metar
/**
 * This class acts as an interface to the METAR/TAF service of
 * weather.noaa.gov. It searches for locations given in ICAO notation and
 * retrieves the current weather data.
 *
 * Of course the parsing of the METAR-data has its limitations, as it
 * follows the Federal Meteorological Handbook No.1 with modifications to
 * accomodate for non-US reports, so if the report deviates from these
 * standards, you won't get it parsed correctly.
 * Anything that is not parsed, is saved in the "noparse" array-entry,
 * returned by getWeather(), so you can do your own parsing afterwards. This
 * limitation is specifically given for remarks, as the class is not
 * processing everything mentioned there, but you will get the most common
 * fields like precipitation and temperature-changes. Again, everything not
 * parsed, goes into "noparse".
 *
 * If you think, some important field is missing or not correctly parsed,
 * please file a feature-request/bugreport at http://pear.php.net/ and be
 * sure to provide the METAR (or TAF) report with a _detailed_ explanation!
 *
 * For working examples, please take a look at
 *     docs/Services_Weather/examples/metar-basic.php
 *     docs/Services_Weather/examples/metar-extensive.php
 *
 *
 * @category    Web Services
 * @package     Services_Weather
 * @author      Alexander Wirtz <alex@pc4p.net>
 * @copyright   2005-2011 Alexander Wirtz
 * @license     http://www.opensource.org/licenses/bsd-license.php  BSD License
 * @version     Release: 1.4.7
 * @link        http://pear.php.net/package/Services_Weather
 * @link        http://weather.noaa.gov/weather/metar.shtml
 * @link        http://weather.noaa.gov/weather/taf.shtml
 * @example     examples/metar-basic.php            metar-basic.php
 * @example     examples/metar-extensive.php        metar-extensive.php
 */
class Services_Weather_Metar extends Services_Weather_Common
{
    // {{{ properties
    /**
     * Information to access the location DB
     *
     * @var     object  DB                  $_db
     * @access  private
     */
    var $_db;

/**
     * The source METAR uses
     *
     * @var     string                      $_sourceMetar
     * @access  private
     */
    var $_sourceMetar;

/**
     * The source TAF uses
     *
     * @var     string                      $_sourceTaf
     * @access  private
     */
    var $_sourceTaf;

/**
     * This path is used to find the METAR data
     *
     * @var     string                      $_sourcePathMetar
     * @access  private
     */
    var $_sourcePathMetar;

/**
     * This path is used to find the TAF data
     *
     * @var     string                      $_sourcePathTaf
     * @access  private
     */
    var $_sourcePathTaf;
    // }}}

// {{{ constructor
    /**
     * Constructor
     *
     * @param   array                       $options
     * @param   mixed                       $error
     * @throws  PEAR_Error
     * @access  private
     */
    function Services_Weather_Metar($options, &$error)
    {
        $perror = null;
        $this->Services_Weather_Common($options, $perror);
        if (Services_Weather::isError($perror)) {
            $error = $perror;
            return;
        }

// Set options accordingly
        $status = null;
        if (isset($options["dsn"])) {
            if (isset($options["dbOptions"])) {
                $status = $this->setMetarDB($options["dsn"], $options["dbOptions"]);
            } else {
                $status = $this->setMetarDB($options["dsn"]);
            }
        }
        if (Services_Weather::isError($status)) {
            $error = $status;
            return;
        }

// Setting the data sources for METAR and TAF - have to watch out for older API usage
        if (($source = isset($options["source"])) || isset($options["sourceMetar"])) {
            $sourceMetar = $source ? $options["source"] : $options["sourceMetar"];
            if (($sourcePath = isset($options["sourcePath"])) || isset($options["sourcePathMetar"])) {
                $sourcePathMetar = $sourcePath ? $options["sourcePath"] : $options["sourcePathMetar"];
            } else {
                $sourcePathMetar = "";
            }
        } else {
            $sourceMetar = "http";
            $sourcePathMetar = "";
        }
        if (isset($options["sourceTaf"])) {
            $sourceTaf = $options["sourceTaf"];
            if (isset($option["sourcePathTaf"])) {
                $sourcePathTaf = $options["sourcePathTaf"];
            } else {
                $soucePathTaf = "";
            }
        } else {
            $sourceTaf = "http";
            $sourcePathTaf = "";
        }
        $status = $this->setMetarSource($sourceMetar, $sourcePathMetar, $sourceTaf, $sourcePathTaf);
        if (Services_Weather::isError($status)) {
            $error = $status;
            return;
        }
    }
    // }}}

// {{{ setMetarDB()
    /**
     * Sets the parameters needed for connecting to the DB, where the
     * location-search is fetching its data from. You need to build a DB
     * with the external tool buildMetarDB first, it fetches the locations
     * and airports from a NOAA-website.
     *
     * @param   string                      $dsn
     * @param   array                       $dbOptions
     * @return  DB_Error|bool
     * @throws  DB_Error
     * @see     DB::parseDSN
     * @access  public
     */
    function setMetarDB($dsn, $dbOptions = array())
    {
        $dsninfo = DB::parseDSN($dsn);
        if (is_array($dsninfo) && !isset($dsninfo["mode"])) {
            $dsninfo["mode"]= 0644;
        }

// Initialize connection to DB and store in object if successful
        $db =  DB::connect($dsninfo, $dbOptions);
        if (DB::isError($db)) {
            return $db;
        }
        $this->_db = $db;

return true;
    }
    // }}}

// {{{ setMetarSource()
    /**
     * Sets the source, where the class tries to locate the METAR/TAF data
     *
     * Source can be http, ftp or file.
     * Alternate sourcepaths can be provided.
     *
     * @param   string                      $sourceMetar
     * @param   string                      $sourcePathMetar
     * @param   string                      $sourceTaf
     * @param   string                      $sourcePathTaf
     * @return  PEAR_ERROR|bool
     * @throws  PEAR_Error::SERVICES_WEATHER_ERROR_METAR_SOURCE_INVALID
     * @access  public
     */
    function setMetarSource($sourceMetar, $sourcePathMetar = "", $sourceTaf = "", $sourcePathTaf = "")
    {
        if (in_array($sourceMetar, array("http", "ftp", "file"))) {
            $this->_sourceMetar = $sourceMetar;
        } else {
            return Services_Weather::raiseError(SERVICES_WEATHER_ERROR_METAR_SOURCE_INVALID, __FILE__, __LINE__);
        }

// Check for a proper METAR source if parameter is set, if not set use defaults
        clearstatcache();
        if (strlen($sourcePathMetar)) {
            if (($this->_sourceMetar == "file" && is_dir($sourcePathMetar)) || ($this->_sourceMetar != "file" && parse_url($sourcePathMetar))) {
                $this->_sourcePathMetar = $sourcePathMetar;
            } else {
                return Services_Weather::raiseError(SERVICES_WEATHER_ERROR_METAR_SOURCE_INVALID, __FILE__, __LINE__);
            }
        } else {
            switch ($sourceMetar) {
                case "http":
                    $this->_sourcePathMetar = "http://weather.noaa.gov/pub/data/observations/metar/stations";
                    break;
                case "ftp":
                    $this->_sourcePathMetar = "ftp://weather.noaa.gov/data/observations/metar/stations";
                    break;
                case "file":
                    $this->_sourcePathMetar = ".";
                    break;
            }
        }

if (in_array($sourceTaf, array("http", "ftp", "file"))) {
            $this->_sourceTaf = $sourceTaf;
        } elseif ($sourceTaf != "") {
            return Services_Weather::raiseError(SERVICES_WEATHER_ERROR_METAR_SOURCE_INVALID, __FILE__, __LINE__);
        }

// Check for a proper TAF source if parameter is set, if not set use defaults
        clearstatcache();
        if (strlen($sourcePathTaf)) {
            if (($this->_sourceTaf == "file" && is_dir($sourcePathTaf)) || ($this->_sourceTaf != "file" && parse_url($sourcePathTaf))) {
                $this->_sourcePathTaf = $sourcePathTaf;
            } else {
                return Services_Weather::raiseError(SERVICES_WEATHER_ERROR_METAR_SOURCE_INVALID, __FILE__, __LINE__);
            }
        } else {
            switch ($sourceTaf) {
                case "http":
                    $this->_sourcePathTaf = "http://weather.noaa.gov/pub/data/forecasts/taf/stations";
                    break;
                case "ftp":
                    $this->_sourcePathTaf = "ftp://weather.noaa.gov/data/forecasts/taf/stations";
                    break;
                case "file":
                    $this->_sourcePathTaf = ".";
                    break;
            }
        }

return true;
    }
    // }}}

// {{{ _checkLocationID()
    /**
     * Checks the id for valid values and thus prevents silly requests to
     * METAR server
     *
     * @param   string                      $id
     * @return  PEAR_Error|bool
     * @throws  PEAR_Error::SERVICES_WEATHER_ERROR_NO_LOCATION
     * @throws  PEAR_Error::SERVICES_WEATHER_ERROR_INVALID_LOCATION
     * @access  private
     */
    function _checkLocationID($id)
    {
        if (is_array($id) || is_object($id) || !strlen($id)) {
            return Services_Weather::raiseError(SERVICES_WEATHER_ERROR_NO_LOCATION, __FILE__, __LINE__);
        } elseif (!ctype_alnum($id) || (strlen($id) > 4)) {
            return Services_Weather::raiseError(SERVICES_WEATHER_ERROR_INVALID_LOCATION, __FILE__, __LINE__);
        }

return true;
    }
    // }}}

/**
     * Downloads the weather- or forecast-data for an id from the server dependant on the datatype and returns it
     *
     * @param   string                      $id
     * @param   string                      $dataType
     * @return  PEAR_Error|array
     * @throws  PEAR_Error::SERVICES_WEATHER_ERROR_WRONG_SERVER_DATA
     * @access  private
     */
    // {{{ _retrieveServerData()
    function _retrieveServerData($id, $dataType) {
        switch($this->{"_source".ucfirst($dataType)}) {
            case "file":
                // File source is used, get file and read as-is into a string
                $source = realpath($this->{"_sourcePath".ucfirst($dataType)}."/".$id.".TXT");
                $data = @file_get_contents($source);
                if ($data === false) {
                    return Services_Weather::raiseError(SERVICES_WEATHER_ERROR_WRONG_SERVER_DATA, __FILE__, __LINE__);
                }
                break;
            case "http":
                // HTTP used, acquire request object and fetch data from webserver. Return body of reply
                include_once "HTTP/Request.php";

$request = &new HTTP_Request($this->{"_sourcePath".ucfirst($dataType)}."/".$id.".TXT", $this->_httpOptions);
                $status = $request->sendRequest();
                if (Services_Weather::isError($status) || (int) $request->getResponseCode() <> 200) {
                    return Services_Weather::raiseError(SERVICES_WEATHER_ERROR_WRONG_SERVER_DATA, __FILE__, __LINE__);
                }

$data = $request->getResponseBody();
                break;
            case "ftp":
                // FTP as source, acquire neccessary object first
                include_once "Net/FTP.php";

// Parse source to get the server data
                $server = parse_url($this->{"_sourcePath".ucfirst($dataType)}."/".$id.".TXT");

// If neccessary options are not set, use defaults
                if (!isset($server["port"]) || $server["port"] == "" || $server["port"] == 0) {
                    $server["port"] = 21;
                }
                if (!isset($server["user"]) || $server["user"] == "") {
                    $server["user"] = "ftp";
                }
                if (!isset($server["pass"]) || $server["pass"] == "") {
                    $server["pass"] = "ftp@";
                }

// Instantiate object and connect to server
                $ftp = &new Net_FTP($server["host"], $server["port"], $this->_httpOptions["timeout"]);
                $status = $ftp->connect();
                if (Services_Weather::isError($status)) {
                    return Services_Weather::raiseError(SERVICES_WEATHER_ERROR_WRONG_SERVER_DATA, __FILE__, __LINE__);
                }

// Login to server...
                $status = $ftp->login($server["user"], $server["pass"]);
                if (Services_Weather::isError($status)) {
                    return Services_Weather::raiseError(SERVICES_WEATHER_ERROR_WRONG_SERVER_DATA, __FILE__, __LINE__);
                }

// ...and retrieve the data into a temporary file
                $tempfile = tempnam("./", "Services_Weather_Metar");
                $status = $ftp->get($server["path"], $tempfile, true, FTP_ASCII);
                if (Services_Weather::isError($status)) {
                    unlink($tempfile);
                    return Services_Weather::raiseError(SERVICES_WEATHER_ERROR_WRONG_SERVER_DATA, __FILE__, __LINE__);
                }

// Disconnect FTP server, and read data from temporary file
                $ftp->disconnect();
                $data = @file_get_contents($tempfile);
                unlink($tempfile);
                break;
        }

// Split data into an array and return
        return preg_split("/\n|\r\n|\n\r/", $data);
    }
    // }}}

// {{{ _parseWeatherData()
    /**
     * Parses the data and caches it
     *
     * METAR KPIT 091955Z COR 22015G25KT 3/4SM R28L/2600FT TSRA OVC010CB
     * 18/16 A2992 RMK SLP045 T01820159
     *
     * @param   array                       $data
     * @return  PEAR_Error|array
     * @throws  PEAR_Error::SERVICES_WEATHER_ERROR_WRONG_SERVER_DATA
     * @throws  PEAR_Error::SERVICES_WEATHER_ERROR_UNKNOWN_LOCATION
     * @access  private
     */
    function _parseWeatherData($data)
    {
        static $compass;
        static $clouds;
        static $cloudtypes;
        static $conditions;
        static $sensors;
        if (!isset($compass)) {
            $compass = array(
                "N", "NNE", "NE", "ENE",
                "E", "ESE", "SE", "SSE",
                "S", "SSW", "SW", "WSW",
                "W", "WNW", "NW", "NNW"
            );
            $clouds    = array(
                "skc"         => "sky clear",
                "nsc"         => "no significant cloud",
                "few"         => "few",
                "sct"         => "scattered",
                "bkn"         => "broken",
                "ovc"         => "overcast",
                "vv"          => "vertical visibility",
                "tcu"         => "Towering Cumulus",
                "cb"          => "Cumulonimbus",
                "clr"         => "clear below 12,000 ft"
            );
            $cloudtypes = array(
                "low" => array(
                    "/" => "Overcast",
                    "0" => "None",                                "1" => "Cumulus (fair weather)",
                    "2" => "Cumulus (towering)",                  "3" => "Cumulonimbus (no anvil)",
                    "4" => "Stratocumulus (from Cumulus)",        "5" => "Stratocumulus (not Cumulus)",
                    "6" => "Stratus or Fractostratus (fair)",     "7" => "Fractocumulus/Fractostratus (bad weather)",
                    "8" => "Cumulus and Stratocumulus",           "9" => "Cumulonimbus (thunderstorm)"
                ),
                "middle" => array(
                    "/" => "Overcast",
                    "0" => "None",                                "1" => "Altostratus (thin)",
                    "2" => "Altostratus (thick)",                 "3" => "Altocumulus (thin)",
                    "4" => "Altocumulus (patchy)",                "5" => "Altocumulus (thickening)",
                    "6" => "Altocumulus (from Cumulus)",          "7" => "Altocumulus (w/ Altocumulus, Altostratus, Nimbostratus)",
                    "8" => "Altocumulus (w/ turrets)",            "9" => "Altocumulus (chaotic)"
                ),
                "high" => array(
                    "/" => "Overcast",
                    "0" => "None",                                "1" => "Cirrus (filaments)",
                    "2" => "Cirrus (dense)",                      "3" => "Cirrus (often w/ Cumulonimbus)",
                    "4" => "Cirrus (thickening)",                 "5" => "Cirrus/Cirrostratus (low in sky)",
                    "6" => "Cirrus/Cirrostratus (high in sky)",   "7" => "Cirrostratus (entire sky)",
                    "8" => "Cirrostratus (partial)",              "9" => "Cirrocumulus or Cirrocumulus/Cirrus/Cirrostratus"
                )
            );
            $conditions = array(
                "+"           => "heavy",                   "-"           => "light",

"vc"          => "vicinity",                "re"          => "recent",
                "nsw"         => "no significant weather",

"mi"          => "shallow",                 "bc"          => "patches",
                "pr"          => "partial",                 "ts"          => "thunderstorm",
                "bl"          => "blowing",                 "sh"          => "showers",
                "dr"          => "low drifting",            "fz"          => "freezing",

"dz"          => "drizzle",                 "ra"          => "rain",
                "sn"          => "snow",                    "sg"          => "snow grains",
                "ic"          => "ice crystals",            "pe"          => "ice pellets",
                "pl"          => "ice pellets",             "gr"          => "hail",
                "gs"          => "small hail/snow pellets", "up"          => "unknown precipitation",

"br"          => "mist",                    "fg"          => "fog",
                "fu"          => "smoke",                   "va"          => "volcanic ash",
                "sa"          => "sand",                    "hz"          => "haze",
                "py"          => "spray",                   "du"          => "widespread dust",

"sq"          => "squall",                  "ss"          => "sandstorm",
                "ds"          => "duststorm",               "po"          => "well developed dust/sand whirls",
                "fc"          => "funnel cloud",

"+fc"         => "tornado/waterspout"
            );
            $sensors = array(
                "rvrno"  => "Runway Visual Range Detector offline",
                "pwino"  => "Present Weather Identifier offline",
                "pno"    => "Tipping Bucket Rain Gauge offline",
                "fzrano" => "Freezing Rain Sensor offline",
                "tsno"   => "Lightning Detection System offline",
                "visno"  => "2nd Visibility Sensor offline",
                "chino"  => "2nd Ceiling Height Indicator offline"
            );
        }

$metarCode = array(
            "report"      => "METAR|SPECI",
            "station"     => "\w{4}",
            "update"      => "(\d{2})?(\d{4})Z",
            "type"        => "AUTO|COR",
            "wind"        => "(\d{3}|VAR|VRB)(\d{2,3})(G(\d{2,3}))?(FPS|KPH|KT|KTS|MPH|MPS)",
            "windVar"     => "(\d{3})V(\d{3})",
            "visFrac"     => "(\d{1})",
            "visibility"  => "(\d{4})|((M|P)?((\d{1,2}|((\d) )?(\d)\/(\d))(SM|KM)))|(CAVOK)",
            "runway"      => "R(\d{2})(\w)?\/(P|M)?(\d{4})(FT)?(V(P|M)?(\d{4})(FT)?)?(\w)?",
            "condition"   => "(-|\+|VC|RE|NSW)?(MI|BC|PR|TS|BL|SH|DR|FZ)?((DZ)|(RA)|(SN)|(SG)|(IC)|(PE)|(PL)|(GR)|(GS)|(UP))*(BR|FG|FU|VA|DU|SA|HZ|PY)?(PO|SQ|FC|SS|DS)?",
            "clouds"      => "(SKC|CLR|NSC|((FEW|SCT|BKN|OVC|VV)(\d{3}|\/{3})(TCU|CB)?))",
            "temperature" => "(M)?(\d{2})\/((M)?(\d{2})|XX|\/\/)?",
            "pressure"    => "(A)(\d{4})|(Q)(\d{4})",
            "trend"       => "NOSIG|TEMPO|BECMG",
            "remark"      => "RMK"
        );

$remarks = array(
            "nospeci"     => "NOSPECI",
            "autostation" => "AO(1|2)",
            "presschg"    => "PRES(R|F)R",
            "seapressure" => "SLP(\d{3}|NO)",
            "precip"      => "(P|6|7)(\d{4}|\/{4})",
            "snowdepth"   => "4\/(\d{3})",
            "snowequiv"   => "933(\d{3})",
            "cloudtypes"  => "8\/(\d|\/)(\d|\/)(\d|\/)",
            "sunduration" => "98(\d{3})",
            "1htempdew"   => "T(0|1)(\d{3})((0|1)(\d{3}))?",
            "6hmaxtemp"   => "1(0|1)(\d{3})",
            "6hmintemp"   => "2(0|1)(\d{3})",
            "24htemp"     => "4(0|1)(\d{3})(0|1)(\d{3})",
            "3hpresstend" => "5([0-8])(\d{3})",
            "sensors"     => "RVRNO|PWINO|PNO|FZRANO|TSNO|VISNO|CHINO",
            "maintain"    => "[\$]"
        );

if (SERVICES_WEATHER_DEBUG) {
            for ($i = 0; $i < sizeof($data); $i++) {
                echo $data[$i]."\n";
            }
        }
        // Eliminate trailing information
        for ($i = 0; $i < sizeof($data); $i++) {
            if (strpos($data[$i], "=") !== false) {
                $data[$i] = substr($data[$i], 0, strpos($data[$i], "="));
                $data = array_slice($data, 0, $i + 1);
                break;
            }
        }
        // Start with parsing the first line for the last update
        $weatherData = array();
        $weatherData["station"]   = "";
        $weatherData["dataRaw"]   = implode(" ", $data);
        $weatherData["update"]    = strtotime(trim($data[0])." GMT");
        $weatherData["updateRaw"] = trim($data[0]);
        // and prepare the rest for stepping through
        array_shift($data);
        $metar = explode(" ", preg_replace("/\s{2,}/", " ", implode(" ", $data)));

// Add a few local variables for data processing
        $trendCount = 0;             // If we have trends, we need this
        $pointer    =& $weatherData; // Pointer to the array we add the data to
        for ($i = 0; $i < sizeof($metar); $i++) {
            // Check for whitespace and step loop, if nothing's there
            $metar[$i] = trim($metar[$i]);
            if (!strlen($metar[$i])) {
                continue;
            }

if (SERVICES_WEATHER_DEBUG) {
                $tab = str_repeat("\t", 3 - floor((strlen($metar[$i]) + 2) / 8));
                echo "\"".$metar[$i]."\"".$tab."-> ";
            }

// Initialize some arrays
            $result   = array();
            $resultVF = array();
            $lresult  = array();

$found = false;
            foreach ($metarCode as $key => $regexp) {
                // Check if current code matches current metar snippet
                if (($found = preg_match("/^".$regexp."$/i", $metar[$i], $result)) == true) {
                    switch ($key) {
                        case "station":
                            $pointer["station"] = $result[0];
                            unset($metarCode["station"]);
                            break;
                        case "wind":
                            // Parse wind data, first the speed, convert from kt to chosen unit
                            if ($result[5] == "KTS") {
                                $result[5] = "KT";
                            }
                            $pointer["wind"] = $this->convertSpeed($result[2], $result[5], "mph");
                            if ($result[1] == "VAR" || $result[1] == "VRB") {
                                // Variable winds
                                $pointer["windDegrees"]   = "Variable";
                                $pointer["windDirection"] = "Variable";
                            } else {
                                // Save wind degree and calc direction
                                $pointer["windDegrees"]   = intval($result[1]);
                                $pointer["windDirection"] = $compass[round($result[1] / 22.5) % 16];
                            }
                            if (is_numeric($result[4])) {
                                // Wind with gusts...
                                $pointer["windGust"] = $this->convertSpeed($result[4], $result[5], "mph");
                            }
                            break;
                        case "windVar":
                            // Once more wind, now variability around the current wind-direction
                            $pointer["windVariability"] = array("from" => intval($result[1]), "to" => intval($result[2]));
                            break;
                        case "visFrac":
                            // Possible fractional visibility here. Check if it matches with the next METAR piece for visibility
                            if (!isset($metar[$i + 1]) || !preg_match("/^".$metarCode["visibility"]."$/i", $result[1]." ".$metar[$i + 1], $resultVF)) {
                                // No next METAR piece available or not matching. Match against next METAR code
                                $found = false;
                                break;
                            } else {
                                // Match. Hand over result and advance METAR
                                if (SERVICES_WEATHER_DEBUG) {
                                    echo $key."\n";
                                    echo "\"".$result[1]." ".$metar[$i + 1]."\"".str_repeat("\t", 2 - floor((strlen($result[1]." ".$metar[$i + 1]) + 2) / 8))."-> ";
                                }
                                $key = "visibility";
                                $result = $resultVF;
                                $i++;
                            }
                        case "visibility":
                            $pointer["visQualifier"] = "AT";
                            if (is_numeric($result[1]) && ($result[1] == 9999)) {
                                // Upper limit of visibility range
                                $visibility = $this->convertDistance(10, "km", "sm");
                                $pointer["visQualifier"] = "BEYOND";
                            } elseif (is_numeric($result[1])) {
                                // 4-digit visibility in m
                                $visibility = $this->convertDistance(($result[1]/1000), "km", "sm");
                            } elseif (!isset($result[11]) || $result[11] != "CAVOK") {
                                if ($result[3] == "M") {
                                    $pointer["visQualifier"] = "BELOW";
                                } elseif ($result[3] == "P") {
                                    $pointer["visQualifier"] = "BEYOND";
                                }
                                if (is_numeric($result[5])) {
                                    // visibility as one/two-digit number
                                    $visibility = $this->convertDistance($result[5], $result[10], "sm");
                                } else {
                                    // the y/z part, add if we had a x part (see visibility1)
                                    if (is_numeric($result[7])) {
                                        $visibility = $this->convertDistance($result[7] + $result[8] / $result[9], $result[10], "sm");
                                    } else {
                                        $visibility = $this->convertDistance($result[8] / $result[9], $result[10], "sm");
                                    }
                                }
                            } else {
                                $pointer["visQualifier"] = "BEYOND";
                                $visibility = $this->convertDistance(10, "km", "sm");
                                $pointer["clouds"] = array(array("amount" => "Clear below", "height" => 5000));
                                $pointer["condition"] = "no significant weather";
                            }
                            $pointer["visibility"] = $visibility;
                            break;
                        case "condition":
                            // First some basic setups
                            if (!isset($pointer["condition"])) {
                                $pointer["condition"] = "";
                            } elseif (strlen($pointer["condition"]) > 0) {
                                $pointer["condition"] .= ",";
                            }

if (in_array(strtolower($result[0]), $conditions)) {
                                // First try matching the complete string
                                $pointer["condition"] .= " ".$conditions[strtolower($result[0])];
                            } else {
                                // No luck, match part by part
                                array_shift($result);
                                $result = array_unique($result);
                                foreach ($result as $condition) {
                                    if (strlen($condition) > 0) {
                                        $pointer["condition"] .= " ".$conditions[strtolower($condition)];
                                    }
                                }
                            }
                            $pointer["condition"] = trim($pointer["condition"]);
                            break;
                        case "clouds":
                            if (!isset($pointer["clouds"])) {
                                $pointer["clouds"] = array();
                            }

if (sizeof($result) == 5) {
                                // Only amount and height
                                $cloud = array("amount" => $clouds[strtolower($result[3])]);
                                if ($result[4] == "///") {
                                    $cloud["height"] = "station level or below";
                                } else {
                                    $cloud["height"] = $result[4] * 100;
                                }
                            } elseif (sizeof($result) == 6) {
                                // Amount, height and type
                                $cloud = array("amount" => $clouds[strtolower($result[3])], "type" => $clouds[strtolower($result[5])]);
                                if ($result[4] == "///") {
                                    $cloud["height"] = "station level or below";
                                } else {
                                    $cloud["height"] = $result[4] * 100;
                                }
                            } else {
                                // SKC or CLR or NSC
                                $cloud = array("amount" => $clouds[strtolower($result[0])]);
                            }
                            $pointer["clouds"][] = $cloud;
                            break;
                        case "temperature":
                            // normal temperature in first part
                            // negative value
                            if ($result[1] == "M") {
                                $result[2] *= -1;
                            }
                            $pointer["temperature"] = $this->convertTemperature($result[2], "c", "f");
                            if (sizeof($result) > 4) {
                                // same for dewpoint
                                if ($result[4] == "M") {
                                    $result[5] *= -1;
                                }
                                $pointer["dewPoint"] = $this->convertTemperature($result[5], "c", "f");
                                $pointer["humidity"] = $this->calculateHumidity($result[2], $result[5]);
                            }
                            if (isset($pointer["wind"])) {
                                // Now calculate windchill from temperature and windspeed
                                $pointer["feltTemperature"] = $this->calculateWindChill($pointer["temperature"], $pointer["wind"]);
                            }
                            break;
                        case "pressure":
                            if ($result[1] == "A") {
                                // Pressure provided in inches
                                $pointer["pressure"] = $result[2] / 100;
                            } elseif ($result[3] == "Q") {
                                // ... in hectopascal
                                $pointer["pressure"] = $this->convertPressure($result[4], "hpa", "in");
                            }
                            break;
                        case "trend":
                            // We may have a trend here... extract type and set pointer on
                            // created new array
                            if (!isset($weatherData["trend"])) {
                                $weatherData["trend"] = array();
                                $weatherData["trend"][$trendCount] = array();
                            }
                            $pointer =& $weatherData["trend"][$trendCount];
                            $trendCount++;
                            $pointer["type"] = $result[0];
                            while (isset($metar[$i + 1]) && preg_match("/^(FM|TL|AT)(\d{2})(\d{2})$/i", $metar[$i + 1], $lresult)) {
                                if ($lresult[1] == "FM") {
                                    $pointer["from"] = $lresult[2].":".$lresult[3];
                                } elseif ($lresult[1] == "TL") {
                                    $pointer["to"] = $lresult[2].":".$lresult[3];
                                } else {
                                    $pointer["at"] = $lresult[2].":".$lresult[3];
                                }
                                // As we have just extracted the time for this trend
                                // from our METAR, increase field-counter
                                $i++;
                            }
                            break;
                        case "remark":
                            // Remark part begins
                            $metarCode = $remarks;
                            $weatherData["remark"] = array();
                            break;
                        case "autostation":
                            // Which autostation do we have here?
                            if ($result[1] == 0) {
                                $weatherData["remark"]["autostation"] = "Automatic weatherstation w/o precipitation discriminator";
                            } else {
                                $weatherData["remark"]["autostation"] = "Automatic weatherstation w/ precipitation discriminator";
                            }
                            unset($metarCode["autostation"]);
                            break;
                        case "presschg":
                            // Decoding for rapid pressure changes
                            if (strtolower($result[1]) == "r") {
                                $weatherData["remark"]["presschg"] = "Pressure rising rapidly";
                            } else {
                                $weatherData["remark"]["presschg"] = "Pressure falling rapidly";
                            }
                            unset($metarCode["presschg"]);
                            break;
                        case "seapressure":
                            // Pressure at sea level (delivered in hpa)
                            // Decoding is a bit obscure as 982 gets 998.2
                            // whereas 113 becomes 1113 -> no real rule here
                            if (strtolower($result[1]) != "no") {
                                if ($result[1] > 500) {
                                    $press = 900 + round($result[1] / 100, 1);
                                } else {
                                    $press = 1000 + $result[1];
                                }
                                $weatherData["remark"]["seapressure"] = $this->convertPressure($press, "hpa", "in");
                            }
                            unset($metarCode["seapressure"]);
                            break;
                        case "precip":
                            // Precipitation in inches
                            static $hours;
                            if (!isset($weatherData["precipitation"])) {
                                $weatherData["precipitation"] = array();
                                $hours = array("P" => "1", "6" => "3/6", "7" => "24");
                            }
                            if (!is_numeric($result[2])) {
                                $precip = "indeterminable";
                            } elseif ($result[2] == "0000") {
                                $precip = "traceable";
                            } else {
                                $precip = $result[2] / 100;
                            }
                            $weatherData["precipitation"][] = array(
                                "amount" => $precip,
                                "hours"  => $hours[$result[1]]
                            );
                            break;
                        case "snowdepth":
                            // Snow depth in inches
                            $weatherData["remark"]["snowdepth"] = $result[1];
                            unset($metarCode["snowdepth"]);
                            break;
                        case "snowequiv":
                            // Same for equivalent in Water... (inches)
                            $weatherData["remark"]["snowequiv"] = $result[1] / 10;
                            unset($metarCode["snowequiv"]);
                            break;
                        case "cloudtypes":
                            // Cloud types
                            $weatherData["remark"]["cloudtypes"] = array(
                                "low"    => $cloudtypes["low"][$result[1]],
                                "middle" => $cloudtypes["middle"][$result[2]],
                                "high"   => $cloudtypes["high"][$result[3]]
                            );
                            unset($metarCode["cloudtypes"]);
                            break;
                        case "sunduration":
                            // Duration of sunshine (in minutes)
                            $weatherData["remark"]["sunduration"] = "Total minutes of sunshine: ".$result[1];
                            unset($metarCode["sunduration"]);
                            break;
                        case "1htempdew":
                            // Temperatures in the last hour in C
                            if ($result[1] == "1") {
                                $result[2] *= -1;
                            }
                            $weatherData["remark"]["1htemp"] = $this->convertTemperature($result[2] / 10, "c", "f");

if (sizeof($result) > 3) {
                                // same for dewpoint
                                if ($result[4] == "1") {
                                    $result[5] *= -1;
                                }
                                $weatherData["remark"]["1hdew"] = $this->convertTemperature($result[5] / 10, "c", "f");
                            }
                            unset($metarCode["1htempdew"]);
                            break;
                        case "6hmaxtemp":
                            // Max temperature in the last 6 hours in C
                            if ($result[1] == "1") {
                                $result[2] *= -1;
                            }
                            $weatherData["remark"]["6hmaxtemp"] = $this->convertTemperature($result[2] / 10, "c", "f");
                            unset($metarCode["6hmaxtemp"]);
                            break;
                        case "6hmintemp":
                            // Min temperature in the last 6 hours in C
                            if ($result[1] == "1") {
                                $result[2] *= -1;
                            }
                            $weatherData["remark"]["6hmintemp"] = $this->convertTemperature($result[2] / 10, "c", "f");
                            unset($metarCode["6hmintemp"]);
                            break;
                        case "24htemp":
                            // Max/Min temperatures in the last 24 hours in C
                            if ($result[1] == "1") {
                                $result[2] *= -1;
                            }
                            $weatherData["remark"]["24hmaxtemp"] = $this->convertTemperature($result[2] / 10, "c", "f");

if ($result[3] == "1") {
                                $result[4] *= -1;
                            }
                            $weatherData["remark"]["24hmintemp"] = $this->convertTemperature($result[4] / 10, "c", "f");
                            unset($metarCode["24htemp"]);
                            break;
                        case "3hpresstend":
                            // Pressure tendency of the last 3 hours
                            // no special processing, just passing the data
                            $weatherData["remark"]["3hpresstend"] = array(
                                "presscode" => $result[1],
                                "presschng" => $this->convertPressure($result[2] / 10, "hpa", "in")
                            );
                            unset($metarCode["3hpresstend"]);
                            break;
                        case "nospeci":
                            // No change during the last hour
                            $weatherData["remark"]["nospeci"] = "No changes in weather conditions";
                            unset($metarCode["nospeci"]);
                            break;
                        case "sensors":
                            // We may have multiple broken sensors, so do not unset
                            if (!isset($weatherData["remark"]["sensors"])) {
                                $weatherData["remark"]["sensors"] = array();
                            }
                            $weatherData["remark"]["sensors"][strtolower($result[0])] = $sensors[strtolower($result[0])];
                            break;
                        case "maintain":
                            $weatherData["remark"]["maintain"] = "Maintainance needed";
                            unset($metarCode["maintain"]);
                            break;
                        default:
                            // Do nothing, just prevent further matching
                            unset($metarCode[$key]);
                            break;
                    }
                    if ($found && !SERVICES_WEATHER_DEBUG) {
                        break;
                    } elseif ($found && SERVICES_WEATHER_DEBUG) {
                        echo $key."\n";
                        break;
                    }
                }
            }
            if (!$found) {
                if (SERVICES_WEATHER_DEBUG) {
                    echo "n/a\n";
                }
                if (!isset($weatherData["noparse"])) {
                    $weatherData["noparse"] = array();
                }
                $weatherData["noparse"][] = $metar[$i];
            }
        }

if (isset($weatherData["noparse"])) {
            $weatherData["noparse"] = implode(" ",  $weatherData["noparse"]);
        }

return $weatherData;
    }
    // }}}

// {{{ _parseForecastData()
    /**
     * Parses the data and caches it
     *
     * TAF KLGA 271734Z 271818 11007KT P6SM -RA SCT020 BKN200
     *     FM2300 14007KT P6SM SCT030 BKN150
     *     FM0400 VRB03KT P6SM SCT035 OVC080 PROB30 0509 P6SM -RA BKN035
     *     FM0900 VRB03KT 6SM -RA BR SCT015 OVC035
     *         TEMPO 1215 5SM -RA BR SCT009 BKN015
     *         BECMG 1517 16007KT P6SM NSW SCT015 BKN070
     *
     * @param   array                       $data
     * @return  PEAR_Error|array
     * @throws  PEAR_Error::SERVICES_WEATHER_ERROR_WRONG_SERVER_DATA
     * @throws  PEAR_Error::SERVICES_WEATHER_ERROR_UNKNOWN_LOCATION
     * @access  private
     */
    function _parseForecastData($data)
    {
        static $compass;
        static $clouds;
        static $conditions;
        static $sensors;
        if (!isset($compass)) {
            $compass = array(
                "N", "NNE", "NE", "ENE",
                "E", "ESE", "SE", "SSE",
                "S", "SSW", "SW", "WSW",
                "W", "WNW", "NW", "NNW"
            );
            $clouds    = array(
                "skc"         => "sky clear",
                "nsc"         => "no significant cloud",
                "few"         => "few",
                "sct"         => "scattered",
                "bkn"         => "broken",
                "ovc"         => "overcast",
                "vv"          => "vertical visibility",
                "tcu"         => "Towering Cumulus",
                "cb"          => "Cumulonimbus",
                "clr"         => "clear below 12,000 ft"
            );
            $conditions = array(
                "+"           => "heavy",                   "-"           => "light",

"vc"          => "vicinity",                "re"          => "recent",
                "nsw"         => "no significant weather",

"+fc"         => "tornado/waterspout"
            );
        }

$tafCode = array(
            "report"      => "TAF|AMD",
            "station"     => "\w{4}",
            "update"      => "(\d{2})?(\d{4})Z",
            "valid"       => "(\d{2})(\d{2})\/(\d{2})(\d{2})",
            "wind"        => "(\d{3}|VAR|VRB)(\d{2,3})(G(\d{2,3}))?(FPS|KPH|KT|KTS|MPH|MPS)",
            "visFrac"     => "(\d{1})",
            "visibility"  => "(\d{4})|((M|P)?((\d{1,2}|((\d) )?(\d)\/(\d))(SM|KM)))|(CAVOK)",
            "condition"   => "(-|\+|VC|RE|NSW)?(MI|BC|PR|TS|BL|SH|DR|FZ)?((DZ)|(RA)|(SN)|(SG)|(IC)|(PE)|(PL)|(GR)|(GS)|(UP))*(BR|FG|FU|VA|DU|SA|HZ|PY)?(PO|SQ|FC|SS|DS)?",
            "clouds"      => "(SKC|CLR|NSC|((FEW|SCT|BKN|OVC|VV)(\d{3}|\/{3})(TCU|CB)?))",
            "windshear"   => "WS(\d{3})\/(\d{3})(\d{2,3})(FPS|KPH|KT|KTS|MPH|MPS)",
            "tempmax"     => "TX(\d{2})\/(\d{2})(\w)",
            "tempmin"     => "TN(\d{2})\/(\d{2})(\w)",
            "tempmaxmin"  => "TX(\d{2})\/(\d{2})(\w)TN(\d{2})\/(\d{2})(\w)",
            "from"        => "FM(\d{2})(\d{2})(\d{2})?Z?",
            "fmc"         => "(PROB|BECMG|TEMPO)(\d{2})?"
        );

if (SERVICES_WEATHER_DEBUG) {
            for ($i = 0; $i < sizeof($data); $i++) {
                echo $data[$i]."\n";
            }
        }
        // Eliminate trailing information
        for ($i = 0; $i < sizeof($data); $i++) {
            if (strpos($data[$i], "=") !== false) {
                $data[$i] = substr($data[$i], 0, strpos($data[$i], "="));
                $data = array_slice($data, 0, $i + 1);
                break;
            }
        }
        // Ok, we have correct data, start with parsing the first line for the last update
        $forecastData = array();
        $forecastData["station"]   = "";
        $forecastData["dataRaw"]   = implode(" ", $data);
        $forecastData["update"]    = strtotime(trim($data[0])." GMT");
        $forecastData["updateRaw"] = trim($data[0]);
        // and prepare the rest for stepping through
        array_shift($data);
        $taf = explode(" ", preg_replace("/\s{2,}/", " ", implode(" ", $data)));

// Add a few local variables for data processing
        $fromTime =  "";            // The timeperiod the data gets added to
        $fmcCount =  0;             // If we have FMCs (Forecast Meteorological Conditions), we need this
        $pointer  =& $forecastData; // Pointer to the array we add the data to
        for ($i = 0; $i < sizeof($taf); $i++) {
            // Check for whitespace and step loop, if nothing's there
            $taf[$i] = trim($taf[$i]);
            if (!strlen($taf[$i])) {
                continue;
            }

if (SERVICES_WEATHER_DEBUG) {
                $tab = str_repeat("\t", 3 - floor((strlen($taf[$i]) + 2) / 8));
                echo "\"".$taf[$i]."\"".$tab."-> ";
            }

// Initialize some arrays
            $result   = array();
            $resultVF = array();
            $lresult  = array();

$found = false;
            foreach ($tafCode as $key => $regexp) {
                // Check if current code matches current taf snippet
                if (($found = preg_match("/^".$regexp."$/i", $taf[$i], $result)) == true) {
                    $insert = array();
                    switch ($key) {
                        case "station":
                            $pointer["station"] = $result[0];
                            unset($tafCode["station"]);
                            break;
                        case "valid":
                            $pointer["validRaw"] = $result[0];
                            // Generates the timeperiod the report is valid for
                            list($year, $month, $day) = explode("-", gmdate("Y-m-d", $forecastData["update"]));
                            // Date is in next month
                            if ($result[1] < $day) {
                                $month++;
                            }
                            $pointer["validFrom"] = gmmktime($result[2], 0, 0, $month, $result[1], $year);
                            $pointer["validTo"]   = gmmktime($result[4], 0, 0, $month, $result[3], $year);
                            unset($tafCode["valid"]);
                            // Now the groups will start, so initialize the time groups
                            $pointer["time"] = array();
                            $fromTime = $result[2].":00";
                            $pointer["time"][$fromTime] = array();
                            // Set pointer to the first timeperiod
                            $pointer =& $pointer["time"][$fromTime];
                            break;
                        case "wind":
                            // Parse wind data, first the speed, convert from kt to chosen unit
                            if ($result[5] == "KTS") {
                                $result[5] = "KT";
                            }
                            $pointer["wind"] = $this->convertSpeed($result[2], $result[5], "mph");
                            if ($result[1] == "VAR" || $result[1] == "VRB") {
                                // Variable winds
                                $pointer["windDegrees"]   = "Variable";
                                $pointer["windDirection"] = "Variable";
                            } else {
                                // Save wind degree and calc direction
                                $pointer["windDegrees"]   = $result[1];
                                $pointer["windDirection"] = $compass[round($result[1] / 22.5) % 16];
                            }
                            if (is_numeric($result[4])) {
                                // Wind with gusts...
                                $pointer["windGust"] = $this->convertSpeed($result[4], $result[5], "mph");
                            }
                            if (isset($probability)) {
                                $pointer["windProb"] = $probability;
                                unset($probability);
                            }
                            break;
                        case "visFrac":
                            // Possible fractional visibility here. Check if it matches with the next TAF piece for visibility
                            if (!isset($taf[$i + 1]) || !preg_match("/^".$tafCode["visibility"]."$/i", $result[1]." ".$taf[$i + 1], $resultVF)) {
                                // No next TAF piece available or not matching. Match against next TAF code
                                $found = false;
                                break;
                            } else {
                                // Match. Hand over result and advance TAF
                                if (SERVICES_WEATHER_DEBUG) {
                                    echo $key."\n";
                                    echo "\"".$result[1]." ".$taf[$i + 1]."\"".str_repeat("\t", 2 - floor((strlen($result[1]." ".$taf[$i + 1]) + 2) / 8))."-> ";
                                }
                                $key = "visibility";
                                $result = $resultVF;
                                $i++;
                            }
                        case "visibility":
                            $pointer["visQualifier"] = "AT";
                            if (is_numeric($result[1]) && ($result[1] == 9999)) {
                                // Upper limit of visibility range
                                $visibility = $this->convertDistance(10, "km", "sm");
                                $pointer["visQualifier"] = "BEYOND";
                            } elseif (is_numeric($result[1])) {
                                // 4-digit visibility in m
                                $visibility = $this->convertDistance(($result[1]/1000), "km", "sm");
                            } elseif (!isset($result[11]) || $result[11] != "CAVOK") {
                                if ($result[3] == "M") {
                                    $pointer["visQualifier"] = "BELOW";
                                } elseif ($result[3] == "P") {
                                    $pointer["visQualifier"] = "BEYOND";
                                }
                                if (is_numeric($result[5])) {
                                    // visibility as one/two-digit number
                                    $visibility = $this->convertDistance($result[5], $result[10], "sm");
                                } else {
                                    // the y/z part, add if we had a x part (see visibility1)
                                    if (is_numeric($result[7])) {
                                        $visibility = $this->convertDistance($result[7] + $result[8] / $result[9], $result[10], "sm");
                                    } else {
                                        $visibility = $this->convertDistance($result[8] / $result[9], $result[10], "sm");
                                    }
                                }
                            } else {
                                $pointer["visQualifier"] = "BEYOND";
                                $visibility = $this->convertDistance(10, "km", "sm");
                                $pointer["clouds"] = array(array("amount" => "Clear below", "height" => 5000));
                                $pointer["condition"] = "no significant weather";
                            }
                            if (isset($probability)) {
                                $pointer["visProb"] = $probability;
                                unset($probability);
                            }
                            $pointer["visibility"] = $visibility;
                            break;
                        case "condition":
                            // First some basic setups
                            if (!isset($pointer["condition"])) {
                                $pointer["condition"] = "";
                            } elseif (strlen($pointer["condition"]) > 0) {
                                $pointer["condition"] .= ",";
                            }

if (in_array(strtolower($result[0]), $conditions)) {
                                // First try matching the complete string
                                $pointer["condition"] .= " ".$conditions[strtolower($result[0])];
                            } else {
                                // No luck, match part by part
                                array_shift($result);
                                $result = array_unique($result);
                                foreach ($result as $condition) {
                                    if (strlen($condition) > 0) {
                                        $pointer["condition"] .= " ".$conditions[strtolower($condition)];
                                    }
                                }
                            }
                            $pointer["condition"] = trim($pointer["condition"]);
                            if (isset($probability)) {
                                $pointer["condition"] .= " (".$probability."% prob.)";
                                unset($probability);
                            }
                            break;
                        case "clouds":
                            if (!isset($pointer["clouds"])) {
                                $pointer["clouds"] = array();
                            }

// Handle the FMC, generate neccessary array if it's the first...
                            if (isset($type)) {
                                if (!isset($forecastData["time"][$fromTime]["fmc"])) {
                                    $forecastData["time"][$fromTime]["fmc"] = array();
                                }
                                $forecastData["time"][$fromTime]["fmc"][$fmcCount] = array();
                                // ...and set pointer.
                                $pointer =& $forecastData["time"][$fromTime]["fmc"][$fmcCount];
                                $fmcCount++;
                                // Insert data
                                $pointer["type"] = $type;
                                unset($type);
                                if (isset($from)) {
                                    $pointer["from"] = $from;
                                    $pointer["to"]   = $to;
                                    unset($from, $to);
                                }
                                if (isset($probability)) {
                                    $pointer["probability"] = $probability;
                                    unset($probability);
                                }
                            }
                            break;
                        default:
                            // Do nothing
                            break;
                    }
                    if ($found && !SERVICES_WEATHER_DEBUG) {
                        break;
                    } elseif ($found && SERVICES_WEATHER_DEBUG) {
                        echo $key."\n";
                        break;
                    }
                }
            }
            if (!$found) {
                if (SERVICES_WEATHER_DEBUG) {
                    echo "n/a\n";
                }
                if (!isset($forecastData["noparse"])) {
                    $forecastData["noparse"] = array();
                }
                $forecastData["noparse"][] = $taf[$i];
            }
        }

if (isset($forecastData["noparse"])) {
            $forecastData["noparse"] = implode(" ",  $forecastData["noparse"]);
        }

return $forecastData;
    }
    // }}}

// {{{ _convertReturn()
    /**
     * Converts the data in the return array to the desired units and/or
     * output format.
     *
     * @param   array                       $target
     * @param   string                      $units
     * @param   string                      $location
     * @access  private
     */
    function _convertReturn(&$target, $units, $location)
    {
        if (is_array($target)) {
            foreach ($target as $key => $val) {
                if (is_array($val)) {
                    // Another array detected, so recurse into it to convert the units
                    $this->_convertReturn($target[$key], $units, $location);
                } else {
                    switch ($key) {
                        case "station":
                            $newVal = $location["name"];
                            break;
                        case "update":
                        case "validFrom":
                        case "validTo":
                            $newVal = gmdate(trim($this->_dateFormat." ".$this->_timeFormat), $val);
                            break;
                        case "wind":
                        case "windGust":
                        case "windshear":
                            $newVal = round($this->convertSpeed($val, "mph", $units["wind"]), 2);
                            break;
                        case "visibility":
                            $newVal = round($this->convertDistance($val, "sm", $units["vis"], 2));
                            break;
                        case "height":
                        case "windshearHeight":
                            if (is_numeric($val)) {
                                $newVal = round($this->convertDistance($val, "ft", $units["height"]), 2);
                            } else {
                                $newVal = $val;
                            }
                            break;
                        case "temperature":
                        case "temperatureHigh":
                        case "temperatureLow":
                        case "dewPoint":
                        case "feltTemperature":
                            $newVal = round($this->convertTemperature($val, "f", $units["temp"]), 2);
                            break;
                        case "pressure":
                        case "seapressure":
                        case "presschng":
                            $newVal = round($this->convertPressure($val, "in", $units["pres"]), 2);
                            break;
                        case "amount":
                        case "snowdepth":
                        case "snowequiv":
                            if (is_numeric($val)) {
                                $newVal = round($this->convertPressure($val, "in", $units["rain"]), 2);
                            } else {
                                $newVal = $val;
                            }
                            break;
                        case "1htemp":
                        case "1hdew":
                        case "6hmaxtemp":
                        case "6hmintemp":
                        case "24hmaxtemp":
                        case "24hmintemp":
                            $newVal = round($this->convertTemperature($val, "f", $units["temp"]), 2);
                            break;
                        case "humidity":
                            $newVal = round($val, 1);
                            break;
                        default:
                            continue 2;
                    }
                    $target[$key] = $newVal;
                }
            }
        }
    }
    // }}}

// {{{ searchLocation()
    /**
     * Searches IDs for given location, returns array of possible locations
     * or single ID
     *
     * @param   string|array                $location
     * @param   bool                        $useFirst       If set, first ID of result-array is returned
     * @return  PEAR_Error|array|string
     * @throws  PEAR_Error::SERVICES_WEATHER_ERROR_UNKNOWN_LOCATION
     * @throws  PEAR_Error::SERVICES_WEATHER_ERROR_DB_NOT_CONNECTED
     * @throws  PEAR_Error::SERVICES_WEATHER_ERROR_INVALID_LOCATION
     * @access  public
     */
    function searchLocation($location, $useFirst = false)
    {
        if (!isset($this->_db) || !DB::isConnection($this->_db)) {
            return Services_Weather::raiseError(SERVICES_WEATHER_ERROR_DB_NOT_CONNECTED, __FILE__, __LINE__);
        }

if (is_string($location)) {
            // Try to part search string in name, state and country part
            // and build where clause from it for the select
            $location = explode(",", $location);

// Trim, caps-low and quote the strings
            for ($i = 0; $i < sizeof($location); $i++) {
                $location[$i] = $this->_db->quote("%".strtolower(trim($location[$i]))."%");
            }

if (sizeof($location) == 1) {
                $where  = "LOWER(name) LIKE ".$location[0];
            } elseif (sizeof($location) == 2) {
                $where  = "LOWER(name) LIKE ".$location[0];
                $where .= " AND LOWER(country) LIKE ".$location[1];
            } elseif (sizeof($location) == 3) {
                $where  = "LOWER(name) LIKE ".$location[0];
                $where .= " AND LOWER(state) LIKE ".$location[1];
                $where .= " AND LOWER(country) LIKE ".$location[2];
            } elseif (sizeof($location) == 4) {
                $where  = "LOWER(name) LIKE ".substr($location[0], 0, -2).", ".substr($location[1], 2);
                $where .= " AND LOWER(state) LIKE ".$location[2];
                $where .= " AND LOWER(country) LIKE ".$location[3];
            }

// Create select, locations with ICAO first
            $select = "SELECT icao, name, state, country, latitude, longitude ".
                      "FROM metarLocations ".
                      "WHERE ".$where." ".
                      "ORDER BY icao DESC";
            $result = $this->_db->query($select);
            // Check result for validity
            if (DB::isError($result)) {
                return $result;
            } elseif (strtolower(get_class($result)) != "db_result" || $result->numRows() == 0) {
                return Services_Weather::raiseError(SERVICES_WEATHER_ERROR_UNKNOWN_LOCATION, __FILE__, __LINE__);
            }

// Result is valid, start preparing the return
            $icao = array();
            while (($row = $result->fetchRow(DB_FETCHMODE_ASSOC)) != null) {
                $locicao = $row["icao"];
                // First the name of the location
                if (!strlen($row["state"])) {
                    $locname = $row["name"].", ".$row["country"];
                } else {
                    $locname = $row["name"].", ".$row["state"].", ".$row["country"];
                }
                if ($locicao != "----") {
                    // We have a location with ICAO
                    $icao[$locicao] = $locname;
                } else {
                    // No ICAO, try finding the nearest airport
                    $locicao = $this->searchAirport($row["latitude"], $row["longitude"]);
                    if (!isset($icao[$locicao])) {
                        $icao[$locicao] = $locname;
                    }
                }
            }
            // Only one result? Return as string
            if (sizeof($icao) == 1 || $useFirst) {
                $icao = key($icao);
            }
        } elseif (is_array($location)) {
            // Location was provided as coordinates, search nearest airport
            $icao = $this->searchAirport($location[0], $location[1]);
        } else {
            return Services_Weather::raiseError(SERVICES_WEATHER_ERROR_INVALID_LOCATION, __FILE__, __LINE__);
        }

return $icao;
    }
    // }}}

// {{{ searchLocationByCountry()
    /**
     * Returns IDs with location-name for a given country or all available
     * countries, if no value was given
     *
     * @param   string                      $country
     * @return  PEAR_Error|array
     * @throws  PEAR_Error::SERVICES_WEATHER_ERROR_UNKNOWN_LOCATION
     * @throws  PEAR_Error::SERVICES_WEATHER_ERROR_DB_NOT_CONNECTED
     * @throws  PEAR_Error::SERVICES_WEATHER_ERROR_WRONG_SERVER_DATA
     * @access  public
     */
    function searchLocationByCountry($country = "")
    {
        if (!isset($this->_db) || !DB::isConnection($this->_db)) {
            return Services_Weather::raiseError(SERVICES_WEATHER_ERROR_DB_NOT_CONNECTED, __FILE__, __LINE__);
        }

// Return the available countries as no country was given
        if (!strlen($country)) {
            $select = "SELECT DISTINCT(country) ".
                      "FROM metarAirports ".
                      "ORDER BY country ASC";
            $countries = $this->_db->getCol($select);

// As $countries is either an error or the true result,
            // we can just return it
            return $countries;
        }

// Now for the real search
        $select = "SELECT icao, name, state, country ".
                  "FROM metarAirports ".
                  "WHERE LOWER(country) LIKE '%".strtolower(trim($country))."%' ".
                  "ORDER BY name ASC";
        $result = $this->_db->query($select);
        // Check result for validity
        if (DB::isError($result)) {
            return $result;
        } elseif (strtolower(get_class($result)) != "db_result" || $result->numRows() == 0) {
            return Services_Weather::raiseError(SERVICES_WEATHER_ERROR_UNKNOWN_LOCATION, __FILE__, __LINE__);
        }

// Construct the result
        $locations = array();
        while (($row = $result->fetchRow(DB_FETCHMODE_ASSOC)) != null) {
            $locicao = $row["icao"];
            if ($locicao != "----") {
                // First the name of the location
                if (!strlen($row["state"])) {
                    $locname = $row["name"].", ".$row["country"];
                } else {
                    $locname = $row["name"].", ".$row["state"].", ".$row["country"];
                }
                $locations[$locicao] = $locname;
            }
        }

return $locations;
    }
    // }}}

// {{{ searchAirport()
    /**
     * Searches the nearest airport(s) for given coordinates, returns array
     * of IDs or single ID
     *
     * @param   float                       $latitude
     * @param   float                       $longitude
     * @param   int                         $numResults
     * @return  PEAR_Error|array|string
     * @throws  PEAR_Error::SERVICES_WEATHER_ERROR_UNKNOWN_LOCATION
     * @throws  PEAR_Error::SERVICES_WEATHER_ERROR_DB_NOT_CONNECTED
     * @throws  PEAR_Error::SERVICES_WEATHER_ERROR_INVALID_LOCATION
     * @access  public
     */
    function searchAirport($latitude, $longitude, $numResults = 1)
    {
        if (!isset($this->_db) || !DB::isConnection($this->_db)) {
            return Services_Weather::raiseError(SERVICES_WEATHER_ERROR_DB_NOT_CONNECTED, __FILE__, __LINE__);
        }
        if (!is_numeric($latitude) || !is_numeric($longitude)) {
            return Services_Weather::raiseError(SERVICES_WEATHER_ERROR_INVALID_LOCATION, __FILE__, __LINE__);
        }

// Get all airports
        $select = "SELECT icao, x, y, z FROM metarAirports";
        $result = $this->_db->query($select);
        if (DB::isError($result)) {
            return $result;
        } elseif (strtolower(get_class($result)) != "db_result" || $result->numRows() == 0) {
            return Services_Weather::raiseError(SERVICES_WEATHER_ERROR_UNKNOWN_LOCATION, __FILE__, __LINE__);
        }

// Result is valid, start search
        // Initialize values
        $min_dist = null;
        $query    = $this->polar2cartesian($latitude, $longitude);
        $search   = array("dist" => array(), "icao" => array());
        while (($row = $result->fetchRow(DB_FETCHMODE_ASSOC)) != null) {
            $icao = $row["icao"];
            $air  = array($row["x"], $row["y"], $row["z"]);

$dist = 0;
            $d = 0;
            // Calculate distance of query and current airport
            // break off, if distance is larger than current $min_dist
            for($d; $d < sizeof($air); $d++) {
                $t = $air[$d] - $query[$d];
                $dist += pow($t, 2);
                if ($min_dist != null && $dist > $min_dist) {
                    break;
                }
            }

if ($d >= sizeof($air)) {
                // Ok, current airport is one of the nearer locations
                // add to result-array
                $search["dist"][] = $dist;
                $search["icao"][] = $icao;
                // Sort array for distance
                array_multisort($search["dist"], SORT_NUMERIC, SORT_ASC, $search["icao"], SORT_STRING, SORT_ASC);
                // If array is larger then desired results, chop off last one
                if (sizeof($search["dist"]) > $numResults) {
                    array_pop($search["dist"]);
                    array_pop($search["icao"]);
                }
                $min_dist = max($search["dist"]);
            }
        }
        if ($numResults == 1) {
            // Only one result wanted, return as string
            return $search["icao"][0];
        } elseif ($numResults > 1) {
            // Return found locations
            return $search["icao"];
        } else {
            return Services_Weather::raiseError(SERVICES_WEATHER_ERROR_UNKNOWN_LOCATION, __FILE__, __LINE__);
        }
    }
    // }}}

// {{{ getLocation()
    /**
     * Returns the data for the location belonging to the ID
     *
     * @param   string                      $id
     * @return  PEAR_Error|array
     * @throws  PEAR_Error
     * @access  public
     */
    function getLocation($id = "")
    {
        $status = $this->_checkLocationID($id);

if (Services_Weather::isError($status)) {
            return $status;
        }

$locationReturn = array();

if ($this->_cacheEnabled && ($location = $this->_getCache("METAR-".$id, "location"))) {
            // Grab stuff from cache
            $this->_location = $location;
            $locationReturn["cache"] = "HIT";
        } elseif (isset($this->_db) && DB::isConnection($this->_db)) {
            // Get data from DB
            $select = "SELECT icao, name, state, country, latitude, longitude, elevation ".
                      "FROM metarAirports WHERE icao='".$id."'";
            $result = $this->_db->query($select);

if (DB::isError($result)) {
                return $result;
            } elseif (strtolower(get_class($result)) != "db_result" || $result->numRows() == 0) {
                return Services_Weather::raiseError(SERVICES_WEATHER_ERROR_UNKNOWN_LOCATION, __FILE__, __LINE__);
            }
            // Result is ok, put things into object
            $this->_location = $result->fetchRow(DB_FETCHMODE_ASSOC);

if ($this->_cacheEnabled) {
                // ...and cache it
                $this->_saveCache("METAR-".$id, $this->_location, "", "location");
            }

$locationReturn["cache"] = "MISS";
        } else {
            $this->_location = array(
                "name"      => $id,
                "state"     => "",
                "country"   => "",
                "latitude"  => "",
                "longitude" => "",
                "elevation" => ""
            );
        }
        // Stuff name-string together
        if (strlen($this->_location["state"]) && strlen($this->_location["country"])) {
            $locname = $this->_location["name"].", ".$this->_location["state"].", ".$this->_location["country"];
        } elseif (strlen($this->_location["country"])) {
            $locname = $this->_location["name"].", ".$this->_location["country"];
        } else {
            $locname = $this->_location["name"];
        }
        $locationReturn["name"]      = $locname;
        $locationReturn["latitude"]  = $this->_location["latitude"];
        $locationReturn["longitude"] = $this->_location["longitude"];
        $locationReturn["sunrise"]   = gmdate($this->_timeFormat, $this->calculateSunRiseSet(gmmktime(), SUNFUNCS_RET_TIMESTAMP, $this->_location["latitude"], $this->_location["longitude"], SERVICES_WEATHER_SUNFUNCS_SUNRISE_ZENITH, 0, true));
        $locationReturn["sunset"]    = gmdate($this->_timeFormat, $this->calculateSunRiseSet(gmmktime(), SUNFUNCS_RET_TIMESTAMP, $this->_location["latitude"], $this->_location["longitude"], SERVICES_WEATHER_SUNFUNCS_SUNSET_ZENITH,  0, false));
        $locationReturn["elevation"] = $this->_location["elevation"];

return $locationReturn;
    }
    // }}}

// {{{ getWeather()
    /**
     * Returns the weather-data for the supplied location
     *
     * @param   string                      $id
     * @param   string                      $unitsFormat
     * @return  PHP_Error|array
     * @throws  PHP_Error
     * @access  public
     */
    function getWeather($id = "", $unitsFormat = "")
    {
        $id     = strtoupper($id);
        $status = $this->_checkLocationID($id);

if (Services_Weather::isError($status)) {
            return $status;
        }

// Get other data
        $units    = $this->getUnitsFormat($unitsFormat);
        $location = $this->getLocation($id);

if (Services_Weather::isError($location)) {
            return $location;
        }

if ($this->_cacheEnabled && ($weather = $this->_getCache("METAR-".$id, "weather"))) {
            // Wee... it was cached, let's have it...
            $weatherReturn  = $weather;
            $this->_weather = $weatherReturn;
            $weatherReturn["cache"] = "HIT";
        } else {
            // Download weather
            $weatherData = $this->_retrieveServerData($id, "metar");
            if (Services_Weather::isError($weatherData)) {
                return $weatherData;
            } elseif (!is_array($weatherData) || sizeof($weatherData) < 2) {
                return Services_Weather::raiseError(SERVICES_WEATHER_ERROR_WRONG_SERVER_DATA, __FILE__, __LINE__);
            }

// Parse weather
            $weatherReturn  = $this->_parseWeatherData($weatherData);

if (Services_Weather::isError($weatherReturn)) {
                return $weatherReturn;
            }

// Add an icon for the current conditions
            // Determine if certain values are set, if not use defaults
            $condition   = isset($weatherReturn["condition"])   ? $weatherReturn["condition"]   : "No Significant Weather";
            $clouds      = isset($weatherReturn["clouds"])      ? $weatherReturn["clouds"]      :                  array();
            $wind        = isset($weatherReturn["wind"])        ? $weatherReturn["wind"]        :                        5;
            $temperature = isset($weatherReturn["temperature"]) ? $weatherReturn["temperature"] :                       70;
            $latitude    = isset($location["latitude"])         ? $location["latitude"]         :                     -360;
            $longitude   = isset($location["longitude"])        ? $location["longitude"]        :                     -360;

// Get the icon
            $weatherReturn["conditionIcon"] = $this->getWeatherIcon($condition, $clouds, $wind, $temperature, $latitude, $longitude, strtotime($weatherReturn["updateRaw"]." GMT"));

// Calculate the moon phase and age
            $moon = $this->calculateMoonPhase(strtotime($weatherReturn["updateRaw"]." GMT"));
            if (Services_Weather::isError($moon)) {
                return $moon;
            }

$weatherReturn["moon"]     = $moon["phase"];
            $weatherReturn["moonIcon"] = $moon["icon"];

if ($this->_cacheEnabled) {
                // Cache weather
                $this->_saveCache("METAR-".$id, $weatherReturn, $unitsFormat, "weather");
            }
            $this->_weather = $weatherReturn;
            $weatherReturn["cache"] = "MISS";
        }

$this->_convertReturn($weatherReturn, $units, $location);

return $weatherReturn;
    }
    // }}}

// {{{ getForecast()
    /**
     * METAR provides no forecast per se, we use the TAF reports to generate
     * a forecast for the announced timeperiod
     *
     * @param   string                      $id
     * @param   int                         $days           Ignored, not applicable
     * @param   string                      $unitsFormat
     * @return  PEAR_Error|array
     * @throws  PEAR_Error
     * @access  public
     */
    function getForecast($id = "", $days = null, $unitsFormat = "")
    {
        $id     = strtoupper($id);
        $status = $this->_checkLocationID($id);

if (Services_Weather::isError($status)) {
            return $status;
        }

// Get other data
        $units    = $this->getUnitsFormat($unitsFormat);
        $location = $this->getLocation($id);

if (Services_Weather::isError($location)) {
            return $location;
        }

if ($this->_cacheEnabled && ($forecast = $this->_getCache("METAR-".$id, "forecast"))) {
            // Wee... it was cached, let's have it...
            $forecastReturn  = $forecast;
            $this->_forecast = $forecastReturn;
            $forecastReturn["cache"] = "HIT";
        } else {
            // Download forecast
            $forecastData = $this->_retrieveServerData($id, "taf");
            if (Services_Weather::isError($forecastData)) {
                return $forecastData;
            } elseif (!is_array($forecastData) || sizeof($forecastData) < 2) {
                return Services_Weather::raiseError(SERVICES_WEATHER_ERROR_WRONG_SERVER_DATA, __FILE__, __LINE__);
            }

// Parse forecast
            $forecastReturn  = $this->_parseForecastData($forecastData);

if (Services_Weather::isError($forecastReturn)) {
                return $forecastReturn;
            }
            if ($this->_cacheEnabled) {
                // Cache weather
                $this->_saveCache("METAR-".$id, $forecastReturn, $unitsFormat, "forecast");
            }
            $this->_forecast = $forecastReturn;
            $forecastReturn["cache"] = "MISS";
        }

$this->_convertReturn($forecastReturn, $units, $location);

return $forecastReturn;
    }
    // }}}
}
// }}}
?>

Back to Directory File Manager